{"product_id":"linnea-tapered-alabaster-cluster-chandelier","title":"Linnea Tapered Alabaster Cluster Chandelier","description":"\u003cp\u003eThe Linnea Tapered Alabaster Cluster Pendant gathers slim stone cones under one round brass canopy, each on its own black cord, each falling to a different height. The shades taper downward and are open at the base, so the light leaves in a defined cone onto whatever sits beneath — and because the stone is thin enough to pass light, the shade itself glows at the same time. You get a directed pool below and a lit object above it, from one piece of alabaster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFinish: White · Gold\u003c\/li\u003e\n  \u003cli\u003eVoltage: AC 110–240V\u003c\/li\u003e\n  \u003cli\u003eControl: Wall switch — dimmable only with dimmable bulbs, see note below\u003c\/li\u003e\n  \u003cli\u003ePower: Max 40W\u003c\/li\u003e\n  \u003cli\u003eMounting: Ceiling — hardwired, cord suspended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDesign \u0026amp; Materials\u003c\/h2\u003e\n\u003cp\u003eThe cluster is doing something a single large fixture cannot. One big shade gives you one pool of light; nine small ones give you nine, overlapping. Where they meet, the light is warmer and denser; at the edges it thins out. That is what makes a cluster feel like it was arranged rather than installed — and hanging them at staggered heights rather than level is the difference between a composition and a row.\u003c\/p\u003e\n\u003cp\u003eAlabaster is a natural stone, so every piece carries its own veining and subtle variation in color. The fixture you receive may therefore differ slightly from the images shown.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eWhite · Gold\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower\u003c\/th\u003e\n\u003ctd\u003eMax 40W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003eAC 110–240V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eWall switch — dimmable only with dimmable bulbs, see note below\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eCeiling — hardwired, cord suspended\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eEnvironment\u003c\/th\u003e\n\u003ctd\u003eIndoor only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003ePreparation time\u003c\/th\u003e\n\u003ctd\u003e5–10 days Made and inspected at our own workshop before dispatch.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003e∅ 11.8″ plate — gathered\u003c\/th\u003e\n\u003ctd\u003eRound tables, entries, stair landings\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel A · 11.8″\u003c\/th\u003e\n\u003ctd\u003eMixed shades\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eBest for\u003c\/th\u003e\n\u003ctd\u003eRound table 42–54″ · entry · stair landing · over a bedside\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eCeiling\u003c\/th\u003e\n\u003ctd\u003e9 ft +\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003e∅ 19.7″ plate — spread\u003c\/th\u003e\n\u003ctd\u003eDining tables, open rooms, stairwells\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eGood to Know\u003c\/h2\u003e\n\u003ch3\u003eShould I choose the small plate or the large one?\u003c\/h3\u003e\n\u003cp\u003eThis is the decision that matters most, because you can change the height after installation but not the plate. The 11.8″ plate holds the shades close together, so the group reads as one tall object. Choose it for a round table, a small entry, or a stair landing — anywhere you want height rather than width.The 19.7″ plate spreads the same shades apart, so each one sits on its own and the light covers more table. Over a dining table this is almost always the right answer.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between Model A, B and C?\u003c\/h3\u003e\n\u003cp\u003eModel A mixes three different cone sizes in one fixture — some wider, some taller, some shorter. That is why no two drops look alike on it, and it is the most varied of the three. Model B: [__ MODEL B — describe what makes it different] Model C: [__ MODEL C — describe what makes it different]All three come on either plate size, and all three hang at the same drop. Not sure? Send us a photo of the room and we'll tell you which suits it.\u003c\/p\u003e\n\u003ch3\u003eIs 59″ too long a drop for my ceiling?\u003c\/h3\u003e\n\u003cp\u003eNo — that figure is the length of cord you receive, not a height you're stuck with. Every cord shortens on its own during installation, so you can hang this tight under a 9 ft ceiling or let it fall the full length into a stairwell.Over a dining table, the lowest shade should sit 30–36″ above the tabletop — lower than feels right at first, but nobody walks under a table. Anywhere people do walk, keep 7 ft of clearance above the floor.Need more than 59″ for a tall entry or stairwell? Tell us your ceiling height when you order and we'll send extra cord.\u003c\/p\u003e\n\u003ch3\u003eWhy don't the stone shades all match?\u003c\/h3\u003e\n\u003cp\u003eBecause they're cut from real stone, not moulded from resin. Alabaster comes out of the ground with its own veining, and every cone is cut from a different piece.So one or two will glow noticeably warmer than the ones beside them, and none will look exactly like the photograph. On a single shade you'd never notice this — hung side by side it's the first thing you see. That's what real stone does, and a set that matched perfectly would have to be plastic.\u003c\/p\u003e\n\u003ch3\u003eDoes it light the table, or just glow?\u003c\/h3\u003e\n\u003cp\u003eBoth — and that's unusual. Each cone is open at the bottom, so a clean pool of light lands on the table underneath. At the same time the stone is thin enough to pass light, so the shade itself glows. Most fixtures do one or the other: a shade that lights the table but stays dark, or a glowing shade that throws nothing useful downward. Here one piece of stone does both.\u003c\/p\u003e","brand":"LightExp","offers":[{"title":"Model A ∅ 11.8″ x H 59.1″ \/ Gold + White","offer_id":67808423870831,"sku":"V-ALCH2608132-1","price":1705.25,"currency_code":"USD","in_stock":true},{"title":"Model A ∅ 19.7″ x H 59.1″ \/ Gold + White","offer_id":67808423903599,"sku":"V-ALCH2608132-2","price":5505.25,"currency_code":"USD","in_stock":true},{"title":"Model B ∅ 11.8″ x H 59.1″ \/ Gold + White","offer_id":67808423936367,"sku":"V-ALCH2608132-3","price":1515.25,"currency_code":"USD","in_stock":true},{"title":"Model B ∅ 19.7″ x H 59.1″ \/ Gold + White","offer_id":67808423969135,"sku":"V-ALCH2608132-4","price":4555.25,"currency_code":"USD","in_stock":true},{"title":"Model C ∅ 11.8″ x H 59.1″ \/ Gold + White","offer_id":67808424001903,"sku":"V-ALCH2608132-5","price":3795.25,"currency_code":"USD","in_stock":true},{"title":"Model C ∅ 19.7″ x H 59.1″ \/ Gold + White","offer_id":67808424034671,"sku":"V-ALCH2608132-6","price":6645.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/3466\/8143\/files\/linnea-tapered-alabaster-cluster-chandelier-vidirlighting-isolated-9-light-tapered-model-jpg-cutout.webp?v=1792483933","url":"https:\/\/lightexp.com\/products\/linnea-tapered-alabaster-cluster-chandelier","provider":"LightExp","version":"1.0","type":"link"}