{"product_id":"plug-in-pendant-light-cord-2-pack-hanging-light-kit-e26-e27","title":"Plug in Pendant Light Cord, 2 Pack Hanging Light Kit, E26 E27 Hanging Lamp Cord with","description":"\u003ch1\u003ePlug-In Pendant Light Cord Kit (2-Pack) — No Wiring, No Electrician\u003c\/h1\u003e\n\u003cp\u003eA plug-in pendant light cord kit is the simplest route to a hanging light for renters, apartment dwellers, and anyone who would rather not cut into a ceiling or book an electrician. This two-pack supplies two 9.8 ft white cords with standard E26\/E27 sockets, each fitted with an on\/off toggle switch positioned 2 ft from the plug.\u003c\/p\u003e\u003cp\u003eEach cord takes the bulb and shade of your choosing, from a paper lantern over a reading chair to a bare filament bulb above a workbench. Because it draws power from a normal wall outlet, the light moves with you, and the included ceiling and cord hooks let the cable be routed along a wall or beam without permanent fixings.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eCord length 9.8 ft per cord; 2 ft from switch to plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eFlame-retardant, heat-resistant insulated cord and socket, white finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight Source\u003c\/th\u003e\n\u003ctd\u003e1 × E26\/E27 bulb per cord (bulbs sold separately) — LED 4–6W, energy-saving 8–11W, incandescent 15–25W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor Temperature\u003c\/th\u003e\n\u003ctd\u003eNot specified — determined by the bulb installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimming\u003c\/th\u003e\n\u003ctd\u003eNot dimmable — on\/off toggle switch on cord, no dimming circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Method\u003c\/th\u003e\n\u003ctd\u003ePlug-in, standard AC power plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110–130V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitch\u003c\/th\u003e\n\u003ctd\u003eOn\/off toggle switch on cord, 2 ft from plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIP Rating\u003c\/th\u003e\n\u003ctd\u003eNot rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor Options\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet Weight\u003c\/th\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eProduct Schema\u003c\/h2\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"Plug-In Pendant Light Cord Kit, 2-Pack \\u2014 9.8 ft White, E26\/E27 Socket\",\n  \"description\": \"A plug-in pendant light cord kit is the simplest route to a hanging light for renters, apartment dwellers, and anyone who would rather not cut into a ceiling or book an electrician. This two-pack supplies two 9.8 ft white cords with standard E26\/E27 sockets, each fitted with an on\/off toggle switch positioned 2 ft from the plug. Each cord takes the bulb and shade of your choosing, from a paper lantern over a reading chair to a bare filament bulb above a workbench. Because it draws power from a n\",\n  \"image\": \"https:\/\/www.lightexp.com\/cdn\/images\/B09BQ53YPP.jpg\",\n  \"sku\": \"B09BQ53YPP\",\n  \"brand\": {\n    \"@type\": \"Brand\",\n    \"name\": \"LIGHTEXP\"\n  },\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"url\": \"https:\/\/www.lightexp.com\/products\/plug-in-pendant-light-cord\",\n    \"priceCurrency\": \"USD\",\n    \"price\": \"19.99\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"itemCondition\": \"https:\/\/schema.org\/NewCondition\"\n  },\n  \"aggregateRating\": {\n    \"@type\": \"AggregateRating\",\n    \"ratingValue\": \"4.8\",\n    \"reviewCount\": \"127\"\n  },\n  \"certification\": \"CE\"\n}\n\u003c\/script\u003e\n\u003ch2\u003eDesign Story\u003c\/h2\u003e\n\u003cp\u003eThe brief behind a cord kit is subtraction: remove the canopy, the junction box, and the installation visit, and keep only the parts that produce light. What remains is a socket, an insulated cord, and a switch placed at hand height rather than overhead.\u003c\/p\u003e\u003cp\u003eThe jacket is flame-retardant and heat-resistant, rated for continuous use with bulbs up to 25W incandescent, which is the sensible ceiling for an open socket hanging in free air. Locating the switch 2 ft from the plug puts it where a hand naturally falls when the cord runs down a wall, avoiding the reach-to-the-ceiling routine that a hardwired pendant imposes.\u003c\/p\u003e\u003cp\u003eThe 9.8 ft length is the other considered choice. It drops a pendant to a working height from a 10 ft ceiling with slack to spare, yet stays short enough that surplus cable can be coiled at the hook instead of dangling. LIGHTEXP ships the kit with both ceiling hooks and cord hooks so the run follows the room rather than the reverse.\u003c\/p\u003e\n\u003ch2\u003eWhere It Works Best\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eReading corner — a pendant where no ceiling box exists.\u003c\/strong\u003e Hang one cord above an armchair in a corner the builder never wired, run the cable down the wall using the cord hooks, and plug into the nearest outlet. With a 4–6W warm-white LED bulb and a small paper or fabric shade, the light sits at roughly seated eye level, which is what makes the chair usable after dark. For drop heights and shade diameters in corners like this, the \u003ca href=\"https:\/\/www.lightexp.com\/blogs\/lighting-guides\" rel=\"noopener\"\u003eLighting Design Guides\u003c\/a\u003e cover the measurements that matter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorkbench or garage — task light that moves.\u003c\/strong\u003e Fit the second cord with a higher-output LED, up to the rated equivalent of 25W incandescent, and suspend it over a bench, potting table, or laundry folding counter. The cord can be shifted along a joist or shelf edge as projects change, something a hardwired fixture cannot do. The pairing is utilitarian by nature: bare bulb, metal shade, or reflector shade against a pegboard wall. The \u003ca href=\"https:\/\/www.lightexp.com\/blogs\/inspiration\" rel=\"noopener\"\u003eDesign Inspiration \u0026amp; Ideas\u003c\/a\u003e section shows utility spaces where an exposed cord reads as part of the scheme.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCloset, basement, or plant shelf — the spaces builders skip.\u003c\/strong\u003e Many closets, stair landings, and basement corners were never given a fixture, and a plug-in cord solves them in minutes. Suspend one from a shelf bracket above a plant shelf with a grow bulb, or hang it in a walk-in closet where a single overhead bulb is all the illumination required. Both cords are white, so they recede against standard white ceilings and trim. If the project grows past one room, the \u003ca href=\"https:\/\/www.lightexp.com\/collections\/all\" rel=\"noopener\"\u003eFull Lighting Collection\u003c\/a\u003e includes hardwired pendants and sconces built on the same low-fuss approach. Start with one cord over the spot that needs light most, then place the second wherever the room asks for it.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs any wiring or drilling required to hang these cords?\u003c\/h3\u003e\u003cp\u003eNo wiring is involved — the cord ends in a standard AC plug that goes into any household outlet, and the bulb screws into the E26\/E27 socket by hand. The kit includes ceiling hooks and cord hooks, so installation is normally a hook turned into a joist or wall, occasionally with a screwdriver. Anyone comfortable hanging a framed picture can run both cords in about fifteen minutes, and no electrician visit is necessary.\u003c\/p\u003e\u003ch3\u003eWhich bulbs fit, and can the cord be dimmed?\u003c\/h3\u003e\u003cp\u003eAny standard E26 or E27 base bulb fits: LED from 4W to 6W, energy-saving or CFL from 8W to 11W, and incandescent from 15W to 25W depending on the bulb. Bulbs are sold separately, so brightness and colour temperature are entirely your decision. There is no dimming circuit in the cord — the switch is a simple on\/off toggle — so a dimmable bulb will not dim through this cord, and putting the outlet on a wall dimmer is not recommended.\u003c\/p\u003e\u003ch3\u003eHow long is the cord, and what drop does that give?\u003c\/h3\u003e\u003cp\u003eEach cord measures 9.8 ft from plug to socket, with the on\/off switch sitting 2 ft from the plug end. On an 8 ft ceiling that leaves ample slack to hang a pendant 30–36 inches above a table, counter, or chair; on a 10 ft ceiling the same cord still reaches a comfortable height. Where the run is longer than the space needs, the surplus can be coiled and tied at the ceiling hook rather than cut.\u003c\/p\u003e\u003ch3\u003eHow should I clean and care for the cords?\u003c\/h3\u003e\u003cp\u003eUnplug the cord and remove the bulb before cleaning. Wipe the cable jacket and socket with a dry or very lightly dampened cloth; the insulated jacket needs no treatment and should not be rubbed with solvents or abrasive pads. Check from time to time that the bulb is seated firmly, that the cable does not rest against a hot bulb or a sharp hook edge, and that it is not run under rugs or through doorways where it can be pinched.\u003c\/p\u003e\u003ch3\u003eHow long does delivery take, and how is it packed?\u003c\/h3\u003e\u003cp\u003eOrders are processed within 3–5 business days, and standard delivery takes 7–15 business days with tracking provided. Both cords are coiled and packed in protective foam-in-box packaging along with the hook hardware, so the set arrives without kinks or crushed sockets.\u003c\/p\u003e\u003ch3\u003eWhat are the returns and warranty terms?\u003c\/h3\u003e\u003cp\u003eThere are 30-day returns on unused items in original packaging. The 24-month warranty covers structural components and the light module — here, the cord, the socket, and the switch assembly. Bulbs are purchased separately and fall outside the warranty, so keep the original box until you are settled on placement.\u003c\/p\u003e","brand":"LightExp","offers":[{"title":"Default Title","offer_id":53500387230063,"sku":"B09BQ53YPP","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/3466\/8143\/files\/51rKgYh8K4L.jpg?v=1789876537","url":"https:\/\/lightexp.com\/products\/plug-in-pendant-light-cord-2-pack-hanging-light-kit-e26-e27","provider":"LightExp","version":"1.0","type":"link"}