Rechargeable Wall Lights, 2 Pack — 29" Black Aluminum Bars with 3CCT Dimming

A two-pack of 29-inch rechargeable wall lights in black aluminum, made for bedrooms, living rooms, and corridors where a slim linear fixture is easier to place than a pendant. Each bar holds a 10000mAh lithium polymer battery that runs 20 to 50 hours depending on brightness, and recharges fully in about six hours.

An indicator light in the arm shows charge status, and a 360° rotation lets the light band be aimed at a wall, a desk, or a mirror. Three color temperatures and five brightness levels are available by touch or remote.

Specifications

Product Schema

Design Story

Aluminum is used here for the reason it suits any long, thin fixture: it holds its shape, resists rust, and does not feel hollow at 29 inches. A painted steel bar of the same length tends to flex and can chip where it bends; extruded aluminum stays straight and keeps its finish.

The 360° rotation is the feature that makes the length useful. Aimed at a wall, the bar becomes a soft wash of indirect light; turned outward, it lights a work surface or a hallway path. The three color temperatures give the fixture range across rooms, from a warm bedroom setting to a cooler white for corridors and offices.

LIGHTEXP keeps the controls split between remote and touch, with each bar having its own switch. That means the pair can be set to different colors if the wall calls for it, rather than being locked into one setting across both fixtures.

Where It Works Best

Bedroom — a slim light above a low bed or console. A 29-inch bar is long enough to light a headboard wall evenly without the fixture itself becoming the focal point. Rotate the arm toward the wall and run it at 20% in the warm setting for a soft glow, or turn it out and raise the brightness for reading. The touch switch means one bedside lamp can be adjusted without the remote. Hanging heights for headboard walls sit in the Lighting Design Guides.

Living room or backdrop wall — indirect light with control. Pointed upward or across a painted wall, the bar becomes ambient light that reads as architecture rather than a lamp. Use the neutral temperature for everyday use and drop to the warm setting in the evening, and set the 1-hour timer if you want the light to switch off on its own after a film. The black aluminum body sits quietly against dark paint and pairs well with walnut furniture and grey upholstery. See similar arrangements in Design Inspiration & Ideas.

Corridor or home office — task light without rewiring. Corridors and home offices often lack a convenient power point, and two drilled holes plus the included hardware solve that in minutes. Aim the bars downward in a hallway for a clean path of light, or onto a desk for reading and handwriting. Because nothing is hardwired, the pair can move to another room later. More wall pieces are listed in the Full Lighting Collection.

Frequently Asked Questions

How difficult is installation?

The fixtures mount with two drilled holes each and the supplied hardware, so no electrician and no wiring are required. Most people complete both in under half an hour with a drill and a screwdriver. Plan the height first, since repositioning means patching the holes.

Does the light use bulbs, and how do I control the brightness?

There is no replaceable bulb — the LED is built into the aluminum arm. Brightness moves through five steps at 20%, 40%, 60%, 80%, and 100%, and color temperature switches between warm, neutral, and white. Both can be set by touch on the fixture or by the included remote, whose battery is not included.

What are the dimensions, and where do these fit?

Each bar measures 29 inches long. That length suits a headboard wall, a backdrop wall, or a corridor run, but check clearance at both ends so the 360° rotation has room. In a small room, one bar may be enough; the pair is best where you want matching light on two walls.

How do I clean and maintain them?

Turn the fixture off and wipe the aluminum body with a dry microfibre cloth. The black finish needs no polish, and solvents or abrasive pads can dull it. Keep water away from the touch switch, and check the indicator area rather than the contacts when diagnosing charging.

How long does shipping take, and how is it packaged?

Orders are processed within 3–5 business days and standard delivery takes 7–15 business days with tracking provided. The two fixtures ship in protective foam-in-box packaging with the remotes, hardware, and charging cables packed separately.

What are the return and warranty terms?

Returns are accepted within 30 days on unused items in their original packaging. A 24-month warranty covers the structural components and the light module against manufacturing defects under normal residential use.

How does charging work, and what runtime should I expect?

A full charge takes about six hours, and the indicator inside the light arm shows when the battery is complete. Runtime ranges from roughly 20 hours at full brightness to 50 hours at the lowest setting. The fixture can be used while charging if you keep it connected.