Two-Pack Matte Black Lantern Pendants with Clear Glass for Islands and Entryways

This two-pack of matte black lantern pendant lights from LIGHTEXP is for households that need a matched pair over a kitchen island, breakfast bar, or hallway run instead of a single centred fixture. Each light pairs a matte black metal frame with a clear glass shade, so the lamp stays visible while its glare is softened.

At 5.9 inches square, the body fits narrow islands and small dining tables where a full-size pendant would crowd the room. Height is set with sectional rigid rods rather than a cord, which keeps each fixture hanging plumb and avoids the slow drift that cord-hung pendants develop.

Specifications

Product Schema

Design Story

The lantern silhouette comes from farmhouse and industrial fixtures, but the frame is simplified — flat uprights, a square shoulder, no scrollwork — so it reads as modern farmhouse rather than reproduction. Clear glass was chosen over seeded or frosted glass to keep output high: with only 5.9 inches of shade width, a diffusing panel would cost more light than the compact body can afford to lose.

Rigid rod suspension is the detail worth noticing. Rod sections thread together to build the drop you need, with a maximum listed hanging height of about 61.8 inches, and lock at each joint. Stiff rods mean the fixture cannot swing or twist the way a cord-hung pendant does, which matters above an island where movement is distracting and in a hallway where people brush past.

Enclosing the socket in glass also keeps dust off the lamp and the inside of the frame, a practical gain over open cage designs. LIGHTEXP supplies both fixtures with matched finish so a two- or three-light run reads as a single installation.

Where It Works Best

Kitchen island — a matched pair over the worktop. Space the two fixtures roughly 30 to 36 inches apart over a 5 to 7 foot island and light lands evenly across the counter with no dark gap at either end. Hang them 30 to 34 inches above the stone so the shades sit below eye level. With 60W-equivalent LED lamps in warm white, there is enough light to prep vegetables and read a recipe on a phone. Shaker cabinetry, a butcher-block top, and black pulls give the finish something to answer to. Spacing and hanging heights are set out in the Lighting Design Guides.

Entryway and hallway — one fixture, then another. Because the pack contains two, a common layout puts one pendant in the front entry and a second further down the hall, repeating the same form so both spaces read as one scheme. The lantern profile sits well against shiplap, board-and-batten, or plain drywall, and the rigid rod keeps it centred over the mat. Fit around a 40W-equivalent lamp here for a softer welcome. Repeated-fixture layouts are shown in Design Inspiration & Ideas.

Covered front porch or breakfast nook. Under a roof overhang the enclosed glass shade keeps wind-blown dust off the socket better than an open cage, though the fixture carries no IP rating and belongs under cover rather than in the open. Centred over a 36-inch round breakfast table, a single pendant gives enough light for coffee and a laptop without a larger shade's footprint. Both units ship with rods and hardware, so one carton completes the pair; coordinating black fixtures are in the Full Lighting Collection.

Frequently Asked Questions

Does installing the pair require an electrician?

Each pendant is a hardwired fixture that mounts to a standard ceiling junction box; the rod sections thread together by hand before the fixture is lifted into place. A screwdriver and a pair of pliers cover most of the work, and both fixtures can typically be installed in under an hour. If you are replacing an existing ceiling light, the existing box and wall switch will usually serve as-is.

Which bulbs fit, and will they dim?

The E26 socket accepts LED, Edison-style, incandescent, halogen, and CFL lamps up to 60W, with 40W recommended for everyday use; bulbs are sold separately. The fixture dims fully when you fit dimmable bulbs and use a compatible wall dimmer, neither of which is included.

How do I know the size will suit my space?

Each fixture measures 5.9 × 5.9 × 8.27 inches, a compact footprint that suits narrow islands, small tables, and hallways rather than large open rooms. Drop height is adjusted by adding or removing rod sections, with a maximum listed height of about 61.8 inches, which covers standard 8- to 10-foot ceilings.

How should I clean the glass and frame?

Switch the fixture off and let the glass cool, then wipe the shade with a dry microfibre cloth or a lightly dampened cloth followed by a dry pass to avoid streaks. The matte black frame needs no polishing. Avoid abrasive pads and solvent sprays, which can dull the coated surface.

How long does shipping take, and how is it packed?

Orders are processed within 3–5 business days and standard delivery takes 7–15 business days, shipped in protective foam-in-box packaging with tracking provided. Both fixtures travel in one carton with rod sections and mounting hardware bagged separately so nothing rattles loose in transit.

What are the returns and warranty terms?

Returns are accepted within 30 days on unused items in original packaging. The 24-month warranty covers structural components and the light module against defects in materials and workmanship, and covers both fixtures in the pack.