21 in Frosted Glass Vanity Sconces, Set of Two — Matte Black, Vertical or Horizontal

These are 21 in frosted glass vanity sconces for bathrooms and dressing rooms that need even, shadow-free light across a mirror rather than a hot spot above it. The set of two pairs a long cylindrical glass shade with an anti-rust metal body in matte black, and each fixture mounts either vertically beside a mirror or horizontally over it.

Both sconces hardwire to a standard US junction box and dim with a dimmable bulb on a compatible dimmer switch. E26 bulbs are sold separately, and a T-type bulb between 5 and 8 in is recommended to fill the length of the tube.

Specifications

Product Schema

Design Story

Frosted glass is chosen here for beam quality rather than appearance. A clear tube over a long bulb shows each filament as a bright line; etching the glass turns the column into one even source, which is what a face needs when it is lit from the side rather than from above.

The 21.25 in length is the other decision that matters. It is long enough for one fixture per side to cover a standard vanity mirror from top to bottom, and the 3.93 in projection keeps the tube close to the wall so it does not crowd a narrow passage or a small powder room.

Allowing both vertical and horizontal mounting from one backplate costs a little more to manufacture and saves the buyer from ordering the wrong orientation, since the bracket and shade rotate together. LIGHTEXP specifies an anti-rust metal body because a bathroom fixture lives with constant humidity, and a plain painted steel body fails at the seams first.

Where It Works Best

Bathroom vanity — vertical pair, either side of the mirror. This is the arrangement the length is designed for: one sconce per side at roughly eye level, about 60–65 in from the floor, so light reaches the face from both sides and shadow under the chin disappears. Matte black against a white or marble vanity reads as a deliberate contrast, and the tube shape suits a rectangular mirror better than a round one. Mounting heights for vanity sconces are set out in the Lighting Design Guides.

Over the mirror — horizontal, single or paired. Turned on its side, the same fixture works above a wide mirror or over a dressing table, where a horizontal source covers more width than height. Fit a T10 LED so the tube is filled end to end, and put it on a dimmer so early-morning light can start low. The frosted glass keeps the output soft at close range, which matters when someone is leaning toward the mirror. The Design Inspiration & Ideas section shows horizontal vanity runs in a range of bathroom sizes.

Bedroom, stairway, or a TV wall — the tube as a vertical line. Away from the bathroom, a 21 in vertical frosted tube reads as a stripe of light on the wall, which suits a stair run, a fireplace surround, or the wall either side of a mounted screen where glare has to be controlled. Two fixtures set at the same height give a formal symmetry that a stair hall carries well. Coordinating black sconces and pendants are gathered in the Full Lighting Collection. Measure the wall and the mirror before ordering, then choose a bulb length that fills the tube.

Frequently Asked Questions

Does this need hardwiring, and what does installation involve?

Both sconces are hardwired to a standard US junction box; mounting hardware is included and the bracket rotates for vertical or horizontal installation. A screwdriver, wire nuts, and a voltage tester cover the job, and a licensed electrician is the right call if no junction box exists at the mounting position. Because the fixture is 21.25 in long, confirm the wall space and the box position before drilling.

Which bulbs should I use, and does it dim?

The socket is a standard E26 base, and a T-type bulb such as a T10 between 5 and 8 in is recommended so the tube is lit along its full length. Bulbs are sold separately. The fixture dims when used with a dimmable bulb and a compatible wall dimmer — there is no dimmer built into the sconce, so both the bulb and the wall control need to support dimming.

What size is the fixture, and will it fit my vanity?

Each sconce measures 5 in long, 3.93 in wide, and 21.25 in high, with the shade projecting just under 4 in from the wall. One fixture per side covers the height of a standard vanity mirror; for a very wide double vanity, two horizontal fixtures over the mirror may serve better than a vertical pair. Measure the mirror and the clearance to any cabinet or shelf before choosing an orientation.

How do I clean the frosted glass and black metal?

Switch off the circuit and let the glass cool before cleaning. Wipe the frosted tube with a soft cloth, using a small amount of glass cleaner on the cloth rather than sprayed onto the fixture, and dry it to avoid streaks. Clean the matte black body with a dry cloth only; solvents and abrasive pads will mark the finish. Take care not to wet the socket end.

How long does delivery take, and how is it packed?

Orders are processed within 3–5 business days, and standard delivery takes 7–15 business days with tracking provided. The glass tubes are held in custom foam inside protective foam-in-box packaging, with the mounting hardware bagged separately, so the shades arrive unbroken and unscratched.

What are the returns and warranty terms?

Returns are accepted within 30 days on unused items in original packaging, and the set of two is returned together. The 24-month warranty covers structural components and the light module, including the glass shades, the metal body, the mounting bracket, and the socket assembly. Bulbs are purchased separately and are not covered. Keep the foam insert until both fixtures are installed and checked.