The Amaris Tiered Teardrop Glass Chandelier is composed of multiple hand-blown, teardrop-shaped glass elements, each individually suspended from slender, nickel-plated arms, creating a graceful silhouette that tapers to a single point at the base. Every drop carries a fine diamond-cut lattice pressed into its surface while the glass is still molten — a texture you feel with a fingertip, not a pattern printed on afterwards. Unlit, the tiers read as frost. Lit, that lattice does the real work: it breaks each beam into hundreds of small refractions, so a textured glass chandelier like this fills a room with scattered warmth instead of a single hard source.
- Finish: Nickel
- Bulbs: E12 / E14 Bulbs not included.
- Custom Size: Glass | Lamp Body Colour Chain / Wire Length Tier Count
- Voltage: AC 110–240V
- Control: Wall switch Dimmable when fitted with a compatible dimmable bulb on a dimmer circuit
Design & Materials
The structural design intentionally leaves assembly details visible. No components are glued or permanently fixed within the fixture's housing; instead, each teardrop hangs independently. This creates a natural, subtly irregular beauty across the tiers—a quality absent in standard molded fixtures—while also allowing for the individual replacement of damaged glass elements without disturbing the rest of the assembly. See the same breath-shaped ribs in the Addis Star-Shaped Glass Tubes Chandelier.
Every teardrop is mouth-blown by hand — which is exactly why the light looks the way it does.
Specifications
| Real Photo |
Every teardrop, laid out before assembly |
| Finish |
Nickel |
| Bulbs |
E12 / E14 Bulbs not included. |
| Power |
Max 40W |
| Voltage |
AC 110–240V |
| Control |
Wall switch Dimmable when fitted with a compatible dimmable bulb on a dimmer circuit |
| Mounting |
Ceiling — hardwired No cord or plug. Professional installation recommended. |
| Environment |
Indoor only · IP20 |
| Preparation time |
5–10 days Made and inspected at our own workshop before dispatch. |
| ∅ 20.5″ × H 21.6″ |
∅ 52 × H 55 cm |
| Best for |
Round table up to 30″ · breakfast nook · powder room · bedroom |
| ∅ 26″ |
Popular |
Good to Know
Is the glass really hand-blown?
Yes. Every teardrop is gathered molten, inflated by breath and shaped by hand — never pressed cold from a die, and never acrylic. The diamond-cut lattice is pressed in while the glass is still soft, and the colour is worked into the molten batch rather than applied to a finished surface.
Can I install it on a sloped or vaulted ceiling?
Yes — and a chain-hung chandelier is the easiest type to do it with. Because the whole fixture hangs from a single point, it stays perfectly level no matter what angle the ceiling above it sits at. Nothing about the tiers needs adjusting.The one part that has to be dealt with is the canopy where it meets the ceiling. A standard canopy sits flush only on a shallow pitch; anything steeper needs a sloped-ceiling adapter — an angled kit that lets the canopy sit flat against the slope while the chain still hangs plumb. Most are rated to around 45°. Tell us the pitch of your ceiling before you order and we will confirm whether an adapter is needed and supply one with the fixture. Do not mount the canopy flat against a steep slope without one — it puts the load on one edge of the box.
Will my ceiling take the weight?
Check before ordering, not after. A multi-tier glass chandelier is heavier than it looks. Confirm that your junction box is rated for the fixture's weight and that there is structural support above it — a standard box carries far less than most people assume, and the larger sizes may need a brace or a heavier-rated box. An electrician can confirm in minutes. Net and shipping weights are available on request for every size.
How high should I hang it?
Over a dining table, hang the lowest teardrop 30–36 in (75–90 cm) above the tabletop — you can go lower than instinct suggests, because nobody walks underneath. Centre it on the table rather than on the room.In an entry, hallway or any open area people walk through, keep at least 7 ft (2.1 m) of clearance from the floor. For open rooms generally, allow roughly 2.5–3 in of drop per foot of ceiling height, and add about 3 in per foot above an 8 ft ceiling.
Can the chain be shortened or made longer?
Shortening is done on site by removing links during installation, so the final drop is set in your room rather than fixed at the factory. For a tall stairwell, atrium or double-height entry, tell us your ceiling height before you order and we will supply extra chain and wire with the fixture. It is much easier to add length before shipping than after.
