Battery Operated Brass Pendant Light with Rechargeable RGB Remote Bulb

A battery powered pendant light combining a polished brass frame with a crystal shade and a rechargeable bulb that dims, warms, cools, and changes colour from a handheld remote, intended for apartments, rentals, and rooms where no ceiling junction box exists and adding one is not worth the cost. The included 2500 mAh bulb charges by USB and runs from 9 to 20 hours depending on brightness and colour settings.

The rope suspension trims to the height you want rather than dictating one, and the whole fixture fits in spots a wired pendant cannot reach: the pitch of a vaulted hallway, a stair landing, or above a table placed away from the wall. Nothing about the installation involves mains wiring.

Specifications

Product Schema

Design Story

Cordless pendants appeared because a large share of American housing stock simply lacks a ceiling box where people want light. Removing the cord removes the electrician, the permit, and the patch job, which changes who can install a pendant at all.

Brass is used rather than plated steel because solid brass forms its own protective oxide instead of flaking like a coating does, so the polished finish survives skin oils and kitchen humidity without the pitting that shows up on thin plated parts after a year. The crystal shade handles the output problem that battery fixtures create: its facets break the beam into many smaller ones, spreading limited lumens across a wider area so the light reads bright without pushing the cell harder.

The RGB range is there for parties and holidays, but the 3000K to 6000K white span is what gets used daily, moving from warm evening light to cooler task light without changing hardware. LIGHTEXP supplies this as a practical answer to an old wiring gap, with a remote that also handles timers so the fixture is not left running overnight.

Where It Works Best

Over a rental kitchen island or a breakfast table. In a building where drilling into the ceiling means a deposit conversation, one cordless fixture centred above the table delivers what occupants usually go without: light directly on the surface they eat and work at. Two people eating, one reading a tablet, kids doing homework — all covered by the same 360-degree spread. Set the rope so the bottom ring sits around 30 inches above the table. Height guidance for single pendants over tables is set out in the Lighting Design Guides.

In an entryway, corridor, or stair landing with no power nearby. These are the rooms most often left unlit, because adding a fixture means fishing cable through finished plaster. Here the same mounting screws carry it: hang it at the turn of a staircase where it greets people at eye level, or over a console table holding keys and post. Brass reads warm against painted panelling and dark floors, and the remote means you can set the timer from the front door rather than reach up to the fixture itself.

As adjustable restaurant or bar lighting. Small venues use these over two-tops where repositioning furniture is routine and hardwiring would lock the floor plan in place. Staff change colour and output from the bar instead of a wall panel, dimming at the end of service and setting a warm white for dinner before that. For more schemes using brass in hospitality rooms, see Design Inspiration & Ideas, and matching cordless pieces are listed in the Full Lighting Collection.

Charge it once and see which room in your home has been waiting for a ceiling box you never wanted to add.

Frequently Asked Questions

Do I need wiring or an electrician to install this?

Nothing connects to mains wiring, so no electrician is needed for this fixture. The pendant mounts to the ceiling with the supplied hardware and anchors, and the rope suspension is adjusted to length before the bulb is fitted. You will need a drill if you are fixing into plaster or masonry, plus a screwdriver for the mounting plate.

Which bulb does it use, and how is dimming handled?

The fixture ships with its own rechargeable LED bulb rather than a standard household one, so no bulb purchase or replacement is required and there is no separate wall dimmer to match. Brightness, colour temperature from 3000K to 6000K, and the 12 RGB colours are all controlled from the included remote, which also sets timers. Treat this as a self-contained system rather than a conventional socketed fixture.

How large is it, and what ceiling height suits it?

The fixture body measures about 9.4 inches wide and high, roughly 7.8 inches deep, which suits a single-point location rather than a wide surface. Because the rope suspension is adjustable rather than fixed, it works in rooms with standard ceilings as well as vaulted ones, where a rigid rod would leave the shade too high. Aim for the usual 30 to 34 inches of clearance above a table or counter.

What is the best way to clean brass and crystal?

Switch the unit off and let the bulb cool, then dust the crystal with a dry microfibre cloth or a soft brush, since moisture trapped between facets leaves spots that are difficult to remove later. Wipe the polished brass with a dry cloth; brass polish is unnecessary while the finish is intact and abrasive pads will scratch it. Always remove the bulb or switch off before any cleaning near the lamp holder.

How long does delivery take, and how is it packed?

Orders are processed within 3-5 business days. Standard delivery takes 7-15 business days, shipped in protective foam-in-box packaging with tracking provided. The crystal shade travels in its own foam cavity, the USB cable and remote are bagged, and the bulb arrives partially charged so it can be tested on arrival.

What do returns and warranty cover?

30-day returns on unused items in original packaging, so keep everything together until you have settled on a final position for the rope. The 24-month warranty covers structural components and the light module, meaning the brass frame, suspension, and rechargeable bulb against defects in materials and workmanship. Battery capacity naturally declines over time and that gradual loss is not a defect.

How does charging work, and how long does a charge last?

The bulb charges from any standard USB port or adapter using the cable supplied, taking about four hours for a full charge. Runtime runs between 9 and 20 hours depending on brightness and whether a static white or colour-cycling mode is used, so lower settings last considerably longer. The manufacturer does not state whether the fixture can run while charging, so plan to recharge between uses rather than relying on continuous plugged-in operation.