Battery Operated Wall Sconces, Set of Two — Brushed Gold with Fabric Shades

A pair of battery-operated wall sconces that pair a retro electroplated brushed gold body with fabric shades, made for bedrooms, dining rooms, and fireplace walls where warm light and a vintage look are wanted without new wiring. Each fixture uses a detachable rechargeable bulb with a magnetic base, so charging means lifting the bulb off rather than unmounting the sconce.

The 10000mAh bulbs run about 16 hours at full brightness and up to 60 hours at the lowest setting after a six-hour charge. Fifteen color tones, ten brightness levels, and two dynamic modes are all reachable from the two included remotes.

Specifications

Product Schema

Design Story

Fabric shades and gold metal belong to a warmer, older idea of wall lighting, but the mechanism behind this pair is entirely modern. The rechargeable bulb attaches by a magnet at its base, which removes the socket-and-thread arrangement that makes vintage-style fixtures awkward to charge.

Brushed electroplated gold is used over metal because a plated surface holds its tone in rooms with swings in humidity or temperature, where sprayed finishes can cloud. The fabric shade filters the LED into a soft glow that suits the retro silhouette and keeps the light comfortable at close range in a bedroom or beside a fireplace.

LIGHTEXP bundles two remotes with the set so both sconces can be run separately or together from one position, which matters when the fixtures sit on opposite ends of a room.

Where It Works Best

Bedroom — vintage glow without a ceiling point. The gold body and fabric shade give a bed wall a settled, older feel that suits an antique dresser or a carved headboard. Lift the magnetic bulbs off to charge, then use one remote from the bed to bring the pair down to 10% for the last hour of the evening and set a 30-minute timer. Set the tone to warm white so the fabric reads as lit rather than washed out. Bedside placement notes are in the Lighting Design Guides.

Dining room or fireplace wall — matched light on either side. Flanking a fireplace or a sideboard with two sconces gives a dining room a formal rhythm, and the fabric shade keeps the light soft at seated eye level. Use the warm setting for dinner and switch to one of the dynamic modes if you want a gentle flicker for an evening gathering. Brass-toned hardware, dark wood, and deep paintwork suit the gold finish. See more pairing ideas in Design Inspiration & Ideas.

Hallway or living room — cordless light with a fabric finish. Where outlets are missing, this pair installs without wiring and can sit wherever the wall needs balance. Run them low in a hallway as a night path, or brighter beside a reading chair, and control each independently from a sofa. The retro tone also works against contemporary furniture, which keeps the fixtures from dating a modern room. More finishes are listed in the Full Lighting Collection.

Frequently Asked Questions

How do I install these, and do I need an electrician?

No electrician is needed, since the fixtures run on rechargeable bulbs with no wiring to connect. Each sconce mounts to the wall with the supplied hardware, and the job takes a few minutes per fixture with a drill and screwdriver. The bulbs can be charged before or after mounting.

What light source is included, and how does dimming work?

Two rechargeable LED bulbs are included, each rated at 500 lumens, and they attach to the fixture by a magnet at the base. Brightness adjusts across ten levels from 10% to 100%, with two dynamic modes called Smooth and Flash. Color can be set to 3000K, 4500K, or 6000K, or to one of twelve RGB tones.

What are the dimensions, and where will they fit?

Fixture dimensions are not specified in the product data, so check the measurements if wall space is tight. The set suits bedrooms, dining rooms, fireplaces, and hallways, and the fabric shades need a little clearance from the wall for the light to diffuse evenly. Confirm the intended mounting height before drilling.

How do I care for the fabric shade and gold finish?

Dust the fabric shade with a soft brush rather than washing it, and keep it clear of direct water. Wipe the brushed gold metal with a dry microfibre cloth; the electroplated surface resists tarnishing but can be scratched by abrasive pads. Remove the magnetic bulbs before cleaning so the contacts stay dry.

How long does shipping take and how is it packed?

Orders are processed within 3–5 business days, and standard delivery takes 7–15 business days with tracking provided. The two sconces, bulbs, remotes, and charging cable ship in protective foam-in-box packaging designed to keep the shades and glass intact.

What are the return and warranty terms?

Returns are accepted within 30 days on unused items in their original packaging. A 24-month warranty covers the structural components and the light module against manufacturing defects under normal residential use.

How does charging work, and can the lights run while charging?

Each bulb charges by Type-C using the included cable, and a full charge takes about six hours. That gives roughly 16 hours at maximum brightness and up to 60 hours at the minimum setting. The bulbs can be used while charging if you leave them connected.