The Corin Curved Arm Candle Chandelier is drawn in a single continuous line. Slim tubes gather into a bundled column at the centre, fall away from it, sweep outward in a wide U, and turn back upward to end in a frosted glass taper — so each arm reads as one uninterrupted gesture rather than a joint bolted to a stem. There are no cups, no bobèches, no decorative collars anywhere on it.
- Finish: Gold · Black · Nickel
- Light source: Integrated LED Built in — no bulbs to buy, fit, or replace.
- Voltage: AC 110–240V
- Control: Wall switch — dimmable on a compatible LED dimmer
- Power: Max 40W
Design & Materials
The idea goes back to the branched candelabra, but strips away everything that was there to catch wax. What survives is the part that always did the work: a raised flame at the end of a reaching arm, repeated around a circle. The glass tapers are frosted rather than clear, so what you see is a soft column of light instead of a filament — the visual memory of a candle without the glare of a bare bulb. Because the arms curve down before they rise, the fixture reads wide and low rather than tall, which is why it suits a long dining table better than a stairwell. Available in brushed brass for warmth or polished chrome for a cooler, more graphic read.
The LED is built into the fixture, so there is nothing to source, nothing to match across a dozen arms, and no mismatched colour six months later when one gets replaced. The trade is that it is not a bulb change at end of life — contact us if a section ever stops working and we will advise on replacement parts.
Specifications
| Finish |
Gold · Black · Nickel |
| Power |
Max 40W |
| Colour temperature |
3000 K |
| Process |
Electroplating, Polishing, Cutting |
| Voltage |
AC 110–240V |
| Control |
Wall switch — dimmable on a compatible LED dimmer |
| Mounting |
Ceiling — hardwired |
| Environment |
Indoor only · IP20 |
| Preparation time |
5–10 days Made and inspected at our own workshop before dispatch. |
| ∅ 37.8″ — Deeper Sweep |
Most Chosen |
| ∅ 37.8″ × H 34.6″ |
∅ 96 × H 88 cm · 8 LIGHTS arms |
| Best for |
Round table 56–72″ · rectangular table 46–56″ wide · square dining room |
Good to Know
Are the tapers glass or acrylic?
Frosted acrylic — and that is on purpose, not to save money.Each taper sits at the far end of a long curved arm, and weight out there is what makes an arm droop over time. Acrylic weighs a fraction of what glass does, so the arms hold their sweep and the fixture keeps hanging level. It also survives a knock during installation, where glass would be a replacement part and a delay.
What are the arms made of?
The arms, the central stem and the ceiling cover are brass, in your choice of gold, black, or nickel. Brass holds a long curve without flexing, and it contains no iron — so unlike painted steel, a chip will not start rusting underneath the finish.
Will I see the bulbs?
No. Each arm ends in a frosted column, so what you see is a soft shaft of light rather than a filament. That matters more than it sounds on a candle-style fixture: the lights sit at roughly eye level for anyone seated at the table, and a bare bulb in that position is uncomfortable all evening.
Are there bulbs to replace?
No — the LED is built into the fixture. Nothing to buy, nothing to match across a dozen arms, and no odd one out six months later when a single bulb gets replaced with a different brand.The trade-off is honest: at the end of its life it is not a bulb change. Contact us if a section ever stops working and we will advise on parts.
Can I dim it?
Yes, but you need an LED-compatible dimmer at the wall — not an older rotary dimmer built for filament bulbs. Because the LED is integrated, you cannot fix a dimming problem by swapping the bulb, so it is worth getting right. Please let us know before placing your order; contact us if you require dimming functionality.
