LightExp
Corwin Alabaster Slat Chandelier
Corwin Alabaster Slat Chandelier
Couldn't load pickup availability
The Corwin Alabaster Slat Chandelier is a natural alabaster chandelier built from slim vertical slats of stone, held by two riveted bands on a brass frame and hung on a classic chain, in single-tier, two-tier and linear styles.
- Glows from within Light passes through the stone itself for a soft, warm glow no glass can copy
- Unique veining Clouds of cream, honey and caramel mean no two chandeliers look the same
- Choose your stone Prefer paler, warmer or more veined slats? Tell us before you order
- Approve before shipping We photograph your actual slats and send them to you for approval
- It does not rust Brass naturally resists rust and corrosion, so the frame keeps its clean lines and finish year after year
Design & Materials
Think of an old cooper's workshop, where barrel staves were fitted side by side and bound with metal hoops until the whole became stronger and more beautiful than any single piece. The Corwin carries that honest, hand-built idea into stone. Slim slats of natural alabaster stand shoulder to shoulder around the drum, and two neat rows of rivets circle it like the bands on a barrel, so the fixture looks crafted and architectural even when it is switched off.
Switch it on and the whole chandelier glows from within. Light passes through every slat, bringing the stone's cream, honey and caramel veining to the surface, while the bulbs disappear completely behind the stone. The open base sends a soft, even pool of light down onto the table or island below, and the glowing drum fills the rest of the room with a warm, glare-free ambience that feels calm and welcoming.
Specifications
| 3 styles | Single, two-tier, linear |
|---|---|
| 10 sizes | 22.4″ to 71.6″ |
| 3 finishes | Gold, Black, Nickel |
| 59″ chain | Longer on request |
| 22.4″ | Dia 57 cm × H 39 cm / Ø 22.4″ × H 15.3″ |
| 53.9″ | L 137 cm × H 26 cm / L 53.9″ × H 10.2″ |
| 71.6″ | L 182 cm × H 26 cm / L 71.6″ × H 10.2″ |
| Shade | Alabaster panel shade |
| Frame | Brass |
| Hanging | Chain, 150 cm / 59″; longer chains made to order |
| Sloped ceiling | Supported on request |
| Bulb base | E12 or E14 (bulbs not included) |
Good to Know
Are the slats real alabaster?
Yes. Every slat is cut from natural alabaster, a translucent stone that glows warm when light passes through it. Because it is a natural material, tone and veining vary from slat to slat, so no two Corwin chandeliers look exactly alike.
Which style should I choose: single-tier, two-tier or linear?
The single-tier drum suits dining rooms, living rooms and bedrooms with standard ceilings. The two-tier chandelier adds height and presence for foyers, stairwells and rooms with tall ceilings, while the linear version spreads light evenly along kitchen islands and long dining tables.
Which size is right for my table?
A good rule is about half to two thirds of the table length. For example, the 36.6″ drum suits tables of roughly 60–72″, the 47.6″ drum 72–96″, and the 71.6″ linear islands of about 96–108″.
How high should it hang?
Leave about 30–36″ between the tabletop or island and the bottom of the chandelier. In open walkways such as an entryway, keep at least 7 ft of clearance below the fixture.
How long is the chain, and can it be longer?
Every Corwin ships with a 150 cm / 59″ chain, and the drop is set during installation to suit your ceiling. For high, vaulted or double-height ceilings, we can make a longer chain to your measurement before the chandelier leaves our factory.
Share
