Plug-In Pendant Light Cord Kit with Hemp Rope, E26/E27 Socket and On/Off Switch

A plug-in pendant cord kit made up of 15 feet of hemp-roped cord, a UL listed inline switch, and an E26/E27 socket, intended for anyone holding a shade they like, whether inherited, thrifted, or handmade, and needing a safe way to hang and power it without opening a ceiling. No shade or bulb is included; that choice stays with you.

The socket accepts either bulb base marking at up to 60 watts on 120 volts, so most household LED lamps fit directly. Because the whole assembly plugs into an ordinary outlet, fixture placement follows furniture rather than following whichever box the builder happened to leave overhead.

Specifications

Product Schema

Design Story

A cord kit exists because the useful half of most discarded lamps is the shade, not the electrical parts. Rather than disposing of a good glass or paper shade over a failed socket, the kit replaces only what wears out, which is line cord, switch, and holder.

Hemp rope is wrapped over the cord rather than around it for grip as much as for appearance, taking the strain of the hang off the copper inside so the cord can support the socket and shade from a hook without strain relief hardware. The 60-watt ceiling at 120 volts reflects what the socket and cord conductors are listed to carry, and it is worth respecting: plenty of LED output fits comfortably below that limit. Listing applies to the plug, switch, and socket individually, which is the meaningful part of the specification for anything carrying mains current.

LIGHTEXP stocks this kit for repair work as much as for new builds, and the 15-foot length is deliberate. It allows a run along the ceiling and down to an outlet in a room where shelves and radiators sit between the two.

Where It Works Best

Bringing an inherited or thrifted shade back into service. Most secondhand lamps fail at either the socket or the cord, and both are exactly what this kit supplies. Fit the old glass or paper shade to the new socket, use the weight rating you can see printed rather than guessing, and hang it as intended over a dining table where the shade becomes the talking point. How many well-made shades reach landfill over nothing more than a failed cord comes down to whether parts like these are easy to find.

A soft light over a bed or a reading chair in a rental. With a small drum or fabric shade fitted, this kit becomes a hanging bedside light that takes up no table space and comes down in minutes at move-out. Choose a warm bulb and set the switch low enough to reach from the pillow. Cord placement tricks of this kind, running it behind a curtain rail or along a shelf edge, are covered further in the Lighting Design Guides.

Workshop, utility room, or studio lighting on a budget. Paired with a plain metal or enamel shade, this is how a garage bench or basement laundry gets a dedicated lamp without any electrical work: one hook, one outlet, no permit. Put the shade low over the bench so the light lands on hands and tools, keep the cord clear of sawblades and sink edges, and use an LED lamp so the assembly stays cool under a closed metal shade. The Design Inspiration & Ideas pages show similar utility arrangements, and matching hardware sits alongside the Full Lighting Collection.

Pick a shade you already own and see how far 15 feet of cord will take it.

Frequently Asked Questions

How much work is involved in setting this up?

Very little: the cord plugs into an ordinary outlet and the fixture hangs from a hook anchored to your ceiling, so the only tool needed for the electrical side is none at all. You will want a screwdriver for the hook itself, and possibly wall or ceiling anchors depending on the surface. Settle the height by moving the hook rather than cutting the cord.

What bulbs fit the socket?

The socket accepts either E26 or E27 based bulbs up to 60 watts at 120 volts, covering standard LED, halogen, and incandescent lamps sold in North America. There is no dimming function, as the inline switch is an on/off control only. Always stay under the printed wattage, and use a lamp small enough that the shade you fit gives it room to dissipate heat.

How do I decide where to hang it?

The cord is 15 feet long, long enough to route from an outlet along the ceiling and down to any point in most rooms, which means positioning is driven by what needs lighting rather than by outlet location. Plan the hook position first, then check the cord run throughout its whole length for anything that could abrade it. Neither a shade nor a bulb is included, so both add to the final height.

How is the hemp-covered cord maintained?

Dust it occasionally with the brush attachment of a vacuum, working along the rope lay rather than against it. Do not wet-clean a mains cord, and avoid solvents that could wick into the insulation beneath the rope wrapping. Every few months, check that the strain relief at the socket end is still tight and that nothing has begun to fray where the cord leaves the hook.

When will the kit ship?

Orders are processed within 3-5 business days. Standard delivery takes 7-15 business days, shipped in protective foam-in-box packaging with tracking provided. The cord arrives coiled rather than folded, since a crease in the rope covering is permanent, and the mounting hardware is bagged separately.

What is covered if something arrives faulty?

30-day returns on unused items in original packaging, so inspect the cord and socket before you begin hanging anything. The 24-month warranty covers structural components and the light module, meaning the cord, switch, plug, and socket assembly, against defects in materials and workmanship. Shades and bulbs you supply yourself are naturally outside that cover.