Isolde Draped Arc Alabaster Chandelier

The Isolde Draped Arc Alabaster Chandelier is built from curved metal bands suspended from several separate ceiling points, each band set with small alabaster pebbles along its length. The arcs sag between their anchors the way a swag of fabric does, one nesting inside the next, and the stones sit directly on the band rather than hanging beneath it — flush pebbles of lit alabaster held against dark metal.

• Finish: White, Black Alabaster: natural white.
• Light source: Integrated LED — warm white 3000K Built in — no bulb to buy, fit, or replace.
• Voltage: AC 110–240V
• Control: Wall switch — Please contact us if you require dimming functionality.
• Power: Max 40W

Design & Materials

Almost every chandelier is one object that arrives with its shape already decided. This one arrives as a set of curves and gets its shape from your ceiling. Because each arc hangs from its own mounting points, the depth of every sag, the distance between the tiers and the overall spread are all set during installation — spread the anchors wide and the arcs flatten into shallow sweeps; bring them close and the curves deepen into a nested cascade. It works across a long dining table, a kitchen island, or a double-height entry, and it reads differently from every position in the room because no two arcs sit in the same plane.

Alabaster is a natural stone, so every piece carries its own veining and subtle variation in color. The fixture you receive may therefore differ slightly from the images shown.

Specifications

Good to Know

Can I hang this where my current chandelier is?

Not directly — and this is the most important thing to know before ordering. Each band is held by a cable at either end, so the fixture anchors to several separate points on your ceiling rather than one canopy. That means new holes, new fixings, and wiring run between them. It is not a swap-out for an existing pendant.

Which size should I choose?

Choose on ceiling height, not table width — and this catches people out, because it works backwards to most chandeliers.The two sizes are almost the same length: 70.9″ and 74″, only three inches apart. What changes is depth: 23.6″ against 47.2″. The large one is nearly four feet tall on its own, before any cable.So: small for a 9–11 ft ceiling over a dining table or island. Large for 11 ft and up — a double-height entry, a stairwell void, a vaulted room. On a standard ceiling the large version simply hangs too low.

Can I change how deep the curves hang?

Yes — that's the whole idea. The bands are flexible rather than rigid, so the arc isn't bent into shape at the factory. It's found by gravity once the anchor points are in your ceiling. Set the anchors further apart and the curve flattens into a long shallow sweep. Bring them closer and it deepens into a fall. Same fixture, two quite different shapes — and the decision is made in your room on the day.

Is it bright enough over a dining table?

Yes, and more evenly than most chandeliers this size. The stones sit along the whole length of every band rather than gathering at a centre, so the light reaches the ends of a long table instead of pooling in the middle. It's also comfortable to sit under: dozens of small glows rather than one bright source, so there's no single point to look into from any seat.

Why don't the stones all look the same?

Because they're cut from real quarried stone, not moulded from resin. Every pebble has its own veining, and some glow noticeably warmer than the ones beside them. On a fixture carrying this many, that's the first thing you notice — and it's what tells you the stone is real. A set that matched perfectly would have to be plastic.