Brushed Nickel Indoor LED Wall Sconce, Color Selectable 3000K / 4000K / 5000K

This is a hardwired indoor LED wall sconce in brushed nickel with a 10-inch profile and a selectable color temperature, intended for bedrooms, hallways and stairways where a single fixture needs to suit more than one room or mood.

The built-in switch moves the output between 3000K warm white, 4000K cool white and 5000K daylight, so the same sconce can be warm at a bedside and neutral along a corridor. An acrylic lens spreads the light across a 120-degree beam to reduce glare, and TRIAC dimming takes brightness from 10% to 100% on a compatible dimmer. The fixture is ETL listed and rated for damp locations.

Specifications

Product Schema

Design Story

The logic behind this sconce is that a fixed color temperature is a commitment made too early. Rooms change purpose — a spare bedroom becomes a home office, a hallway gains a reading chair — and a fixture locked at one white point often ends up wrong for half its life.

So the selector is built into the housing rather than the wall switch: set it during installation and the fixture behaves as a single-color light thereafter. The 120-degree acrylic lens is the other half of the approach. At this output the goal is not a bright point but an even wash, and a wide-angle diffuser removes the striped shadows that a narrower lens leaves on a wall.

The housing is built to resist rust and impact, a choice that matters more in a hallway or entry than the specification suggests, and LIGHTEXP notes the ETL listing because it is a genuine safety mark rather than a marketing claim. A rated life of 25,000 hours is the reason there is no bulb to plan around.

Where It Works Best

Bedroom — warm at night, bright for tasks. Set 3000K on installation and the sconce reads as a soft bedside light; a dimmer takes it down to 10% for the last half hour before sleep, which is the range most people actually use. Fitted either side of a bed at shoulder height, a pair gives even light for reading without a ceiling fixture on. A calm, low-saturation bedroom — linen, oak, off-white walls — suits the brushed nickel finish, which stays quiet against pale surfaces and warm timber alike.

Hallway and stairway — neutral light for circulation. Here the 4000K setting is the sensible default: cool enough to keep a passage legible, warm enough not to feel clinical in a home. Because the beam is 120 degrees wide, light spreads along the wall rather than forming a hot spot, and a repeated run of fixtures reads as a continuous line. Mount them at a consistent height along the run. The Lighting Design Guides cover corridor and stairwell heights and spacing in detail.

Entryway and family room — versatile light for shared space. At 5000K the fixture is daylight-bright, suited to an entry where you are finding keys and shoes, while the same unit at 3000K sits comfortably in a family room in the evening once dimmed. In shared rooms a fixture that can be retuned is worth more than a single fixed white. If you are lighting a whole floor, the Design Inspiration & Ideas journal collects multi-room schemes and the Full Lighting Collection lists coordinating fixtures in the same finishes. One sconce is enough to test the setting you prefer.

Frequently Asked Questions

Does this need an electrician to install?

It is a hardwired fixture that connects to a standard junction box on a 120V circuit, so a qualified electrician should carry out the connection unless you are experienced with mains wiring. The housing mounts flush to the wall and the wiring is a conventional hookup. Choose the color temperature via the built-in switch before the fixture goes up, since reaching it afterwards is harder.

Can I change the color temperature or dim it later?

The color temperature is set by a switch inside the fixture, so it is chosen at installation rather than at the wall, and changes require taking the fixture down. Dimming is handled externally: it supports TRIAC dimming from 10% to 100% with a compatible LED dimmer, and it is verified against popular models including TGCL-153P, MACL-153MLH, CTCL-153P, DVCL-153PR and PD-6WCL.

What are the dimensions, and where will it fit?

The fixture is 10 inches across with a 120-degree beam angle spreading light evenly along the wall. Bedrooms and hallways are the intended settings, and its proportions suit a single fixture between two doors, a pair either side of a bed, or a repeated line up a stairwell. Allow clearance above any furniture and align wall switches to the same height for a consistent look.

How should I clean and look after it?

Switch the circuit off first. The acrylic lens should be wiped with a soft dry or barely damp cloth — alcohol or ammonia cleaners can cloud it and leave streaks that show when lit. The brushed nickel housing wipes clean with a dry cloth; avoid abrasive pads, which scratch the brushed grain and make it catch the light unevenly.

How is it shipped and how long does delivery take?

Orders are processed within 3–5 business days and standard delivery takes 7–15 business days, shipped in protective foam-in-box packaging with tracking provided. The fixture and its mounting hardware travel together in the same carton.

What does the warranty cover?

Returns are accepted within 30 days on unused items in original packaging. This fixture carries a 5-year limited warranty against manufacturing defects, alongside its ETL listing. Contact us directly if a fault develops and we will work through the warranty with you.