Rechargeable Walnut Wood Wall Sconce with Remote and 360° Rotating Magnetic Head

This is a rechargeable walnut wood wall sconce with a 3000mAh battery and handheld remote, built for renters, bedroom readers and anyone who wants wall lighting without cutting into a wall or hiring an electrician. The head is CNC-milled from a single piece of walnut and hand-finished so the grain stays legible, then seated on an iron base with a magnetic ball joint that swings a full 360°.

Brightness runs from 10% to 100% by holding the touch switch or working the remote, and the fixture comes back on at the level you last used. A full USB-C charge takes roughly five hours and returns about 8 hours of light at maximum output, or up to 30 hours at the lowest setting.

Specifications

Product Schema

Design Story

The intent behind this sconce is subtraction: a wall light reduced to a milled wood head, an iron mount and a magnetic ball joint, with no cord, no switch plate and no visible fixings on the face. Because the head lifts off its base, one fixture covers two jobs — a fixed sconce above a bed or sofa, and a portable light that can be carried down a hallway at night.

Milling the head from one piece of walnut rather than laminating thin stock keeps the grain continuous across the visible surface, which is what separates a small wooden object that reads as considered from one that reads as cheap. The magnetic ball mount does the work an adjustable arm would otherwise do: it holds whatever angle the head is turned to, with no knuckle to loosen and no setscrew to re-tighten.

LIGHTEXP specifies this model for rooms where wiring is impractical — rentals, plaster walls, alcoves with no junction box nearby. The four mounting routes, including an adhesive pad and a self-adhesive iron disc, exist so the light can go up and come back down without leaving a hole that has to be patched.

Where It Works Best

Bedroom — reading light beside the bed. Mounted at shoulder height on either side of a headboard, the sconce replaces a table lamp and frees the nightstand entirely. Rotate the head downward so the light falls across the page rather than into your eyes, set the level near the middle of the range, and run it for an evening without touching the switch again. Walnut sits naturally against linen bedding and oak frames, so the fixture reads as part of the room rather than hardware bolted on afterwards. For mounting heights and bedside spacing, the Lighting Design Guides cover wall sconce placement in detail.

Living room — accent light above the sofa. Aimed along the wall rather than straight down, the head washes the surface behind a sofa and gives a seating group depth after the overhead circuit is switched off. This is the layer that keeps a living room from flattening out at night, and the remote means the level can be dropped from the couch without crossing the room. Pair it with a low linen sofa and a wool rug so the wood tone has something to answer to. The Design Inspiration & Ideas section shows cordless sconces used this way in a range of room layouts.

Study or hallway — light where there is no outlet. In a rental hallway, a stair landing or a study with no convenient socket, a battery sconce solves the problem that usually forces a compromise. Fix the base with the adhesive disc on a smooth painted surface, lift the head off to carry it to a desk or a closet, then drop it back onto the magnet. If you are planning a wider scheme, the Full Lighting Collection includes coordinating walnut and iron fixtures for other rooms in the house.

Frequently Asked Questions

Is this sconce hard to install, and what tools does it need?

It installs without any wiring, which puts it within reach of most people. Four mounting routes are supplied: an adhesive pad for smooth, solid surfaces you cannot drill, a screw mount for wallpapered or uneven walls, a self-adhesive iron disc, and direct magnetic attachment to any iron surface. The adhesive and magnetic routes need no tools at all; the screw route needs a drill, a screwdriver and the supplied fixings.

What bulbs does it take, and does it work with a wall dimmer?

There is no bulb to buy and no socket — the LED module is built into the head. Because the fixture is battery-powered and not connected to household wiring, it does not respond to a wall dimmer switch; brightness is set on the fixture itself, either by holding the touch switch for stepless 10%–100% control or by using the remote.

How large is the fixture, and will it fit where I want it?

The manufacturer does not publish overall dimensions for this model, so check the wall area you have in mind before ordering rather than assuming a footprint. What is documented is the mounting behaviour: a compact wood head on a magnetic ball base that rotates a full 360°, so the beam can be aimed along the wall, upward or down at a headboard. Mask the intended position with tape and confirm the head clears adjacent trim, shelving or a door swing.

How should I clean and care for the walnut head?

Dust the wood with a dry, soft cloth and wipe the iron base the same way; no polish is required and the finish does not need re-oiling under normal indoor use. Avoid solvents, spray cleaners and wet cloths on the wood, since standing moisture can raise the grain and mark the surface. Clean the light module side with a barely damp cloth only after the fixture has been switched off and allowed to cool.

How long does delivery take and how is it packed?

Orders are processed within 3–5 business days. Standard delivery takes 7–15 business days, shipped in protective foam-in-box packaging with tracking provided. The head, base and remote are separated inside the carton so the wood cannot rub against the iron mount in transit, and the USB-C cable is bagged with the fixings.

What are the returns and warranty terms?

Returns are accepted within 30 days on unused items in original packaging, so it is worth keeping the carton until you have decided where the sconce will live. The 24-month warranty covers structural components and the light module against defects in materials and workmanship. Battery capacity declining gradually with charge cycles is normal wear and not a defect.

How does charging work, and can it be used while charging?

Charging runs through the USB-C port on the head, and a full charge takes roughly five hours from empty. Runtime is about 8 hours at the highest brightness and up to 30 hours at the lowest, so a light used for an hour or two each evening needs charging only once a week or so. The head lifts off its magnetic base to be charged at any USB port. Using the light while it is connected is not stated in the manufacturer specifications, so plan on charging it between uses.