Black Metal Dome Plug-In Pendant Light with 15 ft Cord

The black metal dome plug-in pendant light is an industrial hanging lamp for kitchens, cafés, basements, and bedrooms that need a light source without a ceiling box. A dome shade in solid metal with a baking-paint finish hangs from a 15 ft cord fitted with an on/off switch.

The UL listed E26 socket takes any standard incandescent or LED bulb up to 60W, purchased separately. Hanging anchors and hooks come in the box, the height is set by drawing the cord through the cable clamp, and the manufacturer puts installation at about five minutes.

Specifications

Product Schema

Design Story

A dome shade distributes light differently from a cone or a flat drum. The curve sends most of the output down onto the surface beneath while the rim releases light outwards at a shallow angle, so the fixture lights a wider circle than its own diameter. That is the effect described as 360° coverage, and it is the reason a dome is specified over a table rather than over a passage.

The baking-paint finish is worth noting because it is a process rather than a colour. The coating is cured under heat, which bonds it to the metal far harder than air-dried spray paint, and the result resists rust and does not fade in the way a cheaper painted shade does near a cooking area or a window. Solid metal also gives the shade enough weight to hang straight.

LIGHTEXP keeps this model in the plug-in industrial group, where the specification is deliberately simple: a socket, a shade, a long cord, and the hardware to hang it. Height adjustment happens at the cable clamp, so the drop can be reset in seconds rather than cut to length.

Where It Works Best

Kitchen — over a work table or a single run. One dome over a kitchen table or a prep run gives a defined pool of light without lighting the whole room, which is often what people want in the evening. Set the drop at 30–36 inches above the surface and clip the cord along the wall to the outlet. A warm LED keeps the black shade from reading harsh against white cabinetry. Heights for kitchen pendants are set out in the Lighting Design Guides.

Basement or reading room — light where the ceiling is unfinished. In a basement, a garage conversion, or a workshop, an open joisted ceiling is exactly the situation a plug-in fixture was made for, since there is no box to connect to and nothing to patch afterwards. Hang it above a bench or a reading chair and let the dome throw its pool of light across the work surface. The Design Inspiration & Ideas pages show industrial pendants in utility spaces.

Café, bar, or breakfast counter — a row on one cord line. Two or three domes spaced evenly along a counter give the repeated rhythm that industrial interiors depend on, and because the cord is 15 ft, the run can be routed to a single outlet at the end. Fit the same bulb type throughout so the colour matches across the row. For other areas of a venue or a home, the Full Lighting Collection carries matching black dome fixtures. Set the height once and leave it.

Frequently Asked Questions

How difficult is installation, and what tools are needed?

No hardwiring is needed: screw the two cable fixtures to the wall or ceiling, hang the shade, and plug into a standard outlet. A screwdriver or drill plus a step ladder covers it, and the manufacturer estimates about five minutes. Hooks and anchors are included, and the cord height is adjusted through the cable clamp rather than cut.

Which bulbs fit, and is it dimmable?

The UL listed E26 socket works with any standard E26 base incandescent or LED bulb up to 60W, and no bulb is included, so it is bought separately. Colour temperature and brightness therefore depend on your choice of bulb, which is worth settling before you hang the shade. The cord switch is on/off only, so the fixture is not dimmable.

Will it suit the space I have in mind?

The manufacturer does not publish shade dimensions for this model, so check the product images against your room. The 15 ft cord covers low and high ceilings including basement and loft heights. As a guide, hang the dome 30–36 inches above a table or counter, and keep at least 6 ft 6 in of clearance below it anywhere people walk.

How should I clean the metal shade?

Unplug the lamp and let the bulb cool, then wipe the shade with a dry or slightly damp microfibre cloth and dry it afterwards. Do not spray cleaner onto the fixture, because liquid can reach the socket. Avoid solvents and abrasive pads on the baking-paint finish, and dust the cord occasionally if it runs near a hob.

How long does delivery take?

Orders are processed within 3–5 business days. Standard delivery takes 7–15 business days, shipped in protective foam-in-box packaging with tracking provided.

What are the returns and warranty terms?

Returns are accepted within 30 days on unused items in original packaging. The 24-month warranty covers structural components and the light module. The E26 socket is UL listed, and the hooks and anchors are worth keeping until the final position is decided.