The Thalia Cleaved Stone Cluster Chandelier hangs flat slabs of alabaster on fine cables from a single brass plate, each one crossed on the diagonal by a slim brass bar. The stone is polished on its faces but the edges are left as they broke — irregular, stepped and slightly ragged, so every slab reads as a piece split from something larger rather than a shape cut to a drawing. The bar is where the light lives: a thin line of brightness running corner to corner, with the stone glowing softly on either side of it.
- Finish: Gold Alabaster: natural white.
- Voltage: AC 110–240V
- Power: Max 40W
- Mounting: Ceiling — hardwired, single canopy
- Environment: Indoor only
Design & Materials
Slabs hang at staggered heights and different angles, so no two face you the same way — from a distance the cluster reads as a single mass, from beneath you look up through the gaps between them. Available from a compact three-light cluster to a nine-light installation, in brass with natural white alabaster, for a dining table, an entry, or a stairwell where a group of stone can be seen from more than one level.
Alabaster is a natural stone, so every piece carries its own veining and subtle variation in color. The fixture you receive may therefore differ slightly from the images shown.
Specifications
| Finish |
Gold Alabaster: natural white. |
| Power |
Max 40W |
| Voltage |
AC 110–240V |
| Mounting |
Ceiling — hardwired, single canopy |
| Environment |
Indoor only |
| Preparation time |
5–10 days Made and inspected at our own workshop before dispatch. |
| 3-Light ∅ 19.7″ |
Compact |
| ∅ 19.7″ × H 47.2″ |
Dia 50cm × H 120cm |
| Best for |
Round table 36–48″ · breakfast nook · entry · over a console |
| Ceiling |
9–11 ft |
| 5-Light ∅ 23.6″ |
Most chosen |
| ∅ 23.6″ × H 59.1″ |
Dia 60cm × H 150cm |
Good to Know
Which size should I choose?
Two separate decisions here, which is unusual. Match the width to the table — roughly half its width — then pick the drop your ceiling can carry. 19.7″ for a round table 36–48″ or an entry. 23.6″ for a dining table 48–60″. 31.5″ for 60–72″ — and this one comes at two depths, so a wide table under a normal ceiling and a stairwell void can both have it.The deepest version is 78.7″ — six and a half feet of fixture — and needs about 13 ft of ceiling.
Can I dim it?
Yes, but you have to ask for it when you order. The LED is built into the fixture, so there's no bulb to swap for a dimmable one afterwards. A dimmable version is available — tell us when you order.
Is there a bulb to replace?
No — the LED is built in, running at warm white 3000K.
How low should it hang?
Over a dining table, the lowest slab should sit 30–36″ above the tabletop. Anywhere people walk beneath it, keep 7 ft of clearance above the floor. Cables are 59″ each and adjust independently, so you set every height in the room — and if you need more for a stairwell, tell us your ceiling height when you order.
Should the slabs all hang at the same height?
No — and this matters more here than on most clusters. The slabs are meant to hang at different heights and different angles, so no two face you the same way.Hang them all long first, stand back, then shorten one cable at a time. Set level and at matching angles, the cluster loses its whole effect — it stops looking arranged and starts looking like a grid.
